Amerlock 2 400 Mixing Instructions
Amerlock 2 400 Mixing Instructions. All surfaces must be clean, dry and free of all contaminants, including salt deposits. Web amerlock 2 voc product data/application instructions:
High performance self priming universal epoxy. Add between 5 and 7½ % of recommended thinner and continue to mix until a uniform consistency is obtained. Web impractical, amerlock 400 can be applied over mechanically cleaned surfaces.
All Surfaces Must Be Clean, Dry And Free Of All Contaminants, Including Salt Deposits.
Surface tolerant and abrasion resistant. Web 22 rows amerlock 2: All surfaces must be clean, dry and free of all contaminants, including salt deposits.
Web Amerlock 400 Is Available In A Variety Of Colors, Including Aluminum, And Therefore Does Not Require A Topcoat.
Web amerlock 400c cure and mix to a uniform consistency. 1 part base to 1 part hardener; Compatible with adherent rust remaining on prepared surfaces;
Web Impractical, Amerlock 400 Can Be Applied Over Mechanically Cleaned Surfaces.
Amerlock 400 depending on porosity a third coat may be necessary 100 125 green concrete. For extended weatherability or special uses, a topcoat may be desir ed. Add between 5 and 7½ % of recommended thinner and continue to mix until a uniform consistency is obtained.
Web Amerlock 2 Voc Product Data/Application Instructions:
Web amerlock 400 gf, pearl gray, 2 gallon kit. All surfaces must be clean, dry and free of all contaminants, including salt deposits. Web impractical, amerlock 2 can be applied over mechanically cleaned surfaces.
High Performance Self Priming Universal Epoxy.
Remove water, salt, dirt, oil, loose rust and all rust scale. Web impractical, amerlock 400 can be applied over mechanically cleaned surfaces. High build, up to 20 mils in one coat;
Post a Comment for "Amerlock 2 400 Mixing Instructions"